Wow, I thought this was an easy one for this list, no one? > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Bradley Caricofe > Sent: Friday, June 13, 2003 4:39 PM > To: [EMAIL PROTECTED] > Subject: RH 7.3 - Adding IP's > > > Hi, I recently leased a dedicated server and asked for four > additional IP's > to be allocated to my machine (it came with 2). I told them I'd > install the > IP's myself because I've done it before, however I think I've only done it > on RH 7.2 systems, this new box being 7.3. > > Anyhoo, these are the instructions I had saved from before when > doing this, > after a reboot my new IP's don't show up in ifconfig though. > > -- > > Login as root. > > cd /etc/sysconfig/network-scripts > cp ifcfg-eth0 ifcfg-eth0:0 > pico ifcfg-eth0:0 > > change the two lines as follows where xxx.xxx.xxx.xxx is the new > ip address > you want to use for your name server. > > DEVICE="eth0:0" > IPADDR="xxx.xxx.xxx.xxx" > > Save the file > > You can repeat this using eth0:1, eth0:2 etc for any additional > ip addresses > you want to allocate to this box. If you only have one box then > leave one ip > address unassigned as you will need it when configuring the "secondary" > virtual dns. > > logout and REBOOT your server from the control panel > > -- > > Can anyone tell me what I missed? > > thanks, > Brad > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED] > https://www.redhat.com/mailman/listinfo/redhat-list
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
