On Fri, 13 Jun 2003 10:46:27 -0400
"dlangschied" <[EMAIL PROTECTED]> wrote:

> Steve,
> I also have another question out there involving the stall of my boot
> process.  If I plug in my network, I get a stall at pcmcia durin
> reboot.  I need to fix this so that I can get to the internet to get
> the webadmin software.  Any ideas?
> 
> Sincerely,
> 
> David Langschied
> Langschied Consulting Services
> 25644 Mackinac
> Roseville, MI 48066
> 
> Phone:  (586)777-7542
> Cell:      (248)789-8493
> e-mail:  [EMAIL PROTECTED]

Change the numbering for running your pcmcia services so they come up
before networking. They're in /etc/rc<runlevel>.d and the ones that
start things are started with S while those that stop them start with K.

If you login graphically, that would be /etc/rc5.d/S10network and
/etc/rc5.d/S24pcmcia. Just rename the pcmcia link (they're only symlinks
and can even be deleted and recreated linking from /etc/init.d scripts)
to S09 or thereabouts. Just make it lower numbered than networking.

If you run up to commandline instead of graphical login, change rc5.d to
rc3.d throughout.

That change will make them run up before networking and then it should
work or be easier to configure.

As for the stalling, I don't know why. Maybe the machine has trouble
recognizing the card. if that's the case, the above still might not let
you get networked.

I'm no laptop expert, having only had linux installed on one a long time
ago. But I know the above. And that's about it. Otherwise I know some
cards work well, some barely work, and some don't work at all. I
couldn't begin to tell you which is which.

-- 
If it was easy, you probably did it wrong.


-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list

Reply via email to