Actually you can get an NE2K card/clone running with Red Hat 5 right out
of the box. I have two isa ethernet cards in my system, one is a 3Com
Etherlink II (3C503), and one is a NE2K clone. I am not using the 3Com
card at the moment.

This is contents of my /etc/conf.modules file:

alias cdrom mcd
options mcd mcd=0x230,11 
alias eth0 ne
options eth0 io=0x340 irq=5
alias eth1 3c503
options eth1 io=0x250 irq=9 
alias sound sb
options -k sb io=0x220 irq=10 dma=1,5
alias midi opl3
options -k opl3 io=0x388


I think the format is self evident. In any case it is in one of the
faq/howto documents. Additionally I modified the
/etc/sysconfig/network-scripts/ifcfg-eth0 file to read as follows:

DEVICE=eth0
IPADDR=0.0.0.0
NETMASK=255.255.255.0
NETWORK=0.0.0.0
BROADCAST=255.255.255.255
ONBOOT=yes
BOOTPROTO=dhcp

Your settings will vary according to your hardware and network
configuration. These modifications can be made automatically by logging
in as root, starting x windows and running the control-panel
application. The conf.modules file is modified by the kernel
configurator, and the network configurator modifies the ifcfg-eth0 and
other network configuration files.

Hope this helps.
Paul Hostetler

Igmar Palsenberg wrote:
> 
> >Group:
> 
> >Well, have the system working well now in Xwindows but want to try >to get
> Ethernet services working now...
> 
> >When I first installed the system, I did not install Ethernet since it
> >could not find my NE-2000 clone card...  Two questions:
> 
> Recompile your kernel and include ne2000 support.
> 
> >1.) Once I have installed the system, can I then later install Ethernet
> >networking ?
> 
> This is easiest done in X : Startup netcfg. If you don't have X or netcfg,
> you'll have to edit configuration files manually.
> 
> >2.) The install program could not autoprobe find my NE-2000 >compatible
> clone card.  The diagnostic program that came with the >card finds the card
> just fine and it does the loopback test also to my >main Win95 system, so I
> believe the hardware is there and >working...  The diagnostic program also
> told me that the Base I/O >address was FF80 and the Interrupt was 11.
> Entering these >manually, the system still told me it found no hardware...
> 
> This is kind of "normal". Just recompile your kernel and it should find your
> ne2000 (clone) card.
> 
> >3.) What do I do now...?  How can I make the system recognize my >card ?
> 
> >Thanks
> 
> >Michael Hatzakis, Jr MD
> >Resident Physiatrist - R3
> >Thomas Jefferson University Hospital
> >Department of Rehabilitation Medicine
> >Philadelphia, PA, 19026
> 
> >E-Mail Address:  [EMAIL PROTECTED]
> 
> Igmar Palsenberg
> 
> --
>   PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
>          To unsubscribe: mail [EMAIL PROTECTED] with
>                        "unsubscribe" as the Subject.
> 
> --
>   PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
>          To unsubscribe: mail [EMAIL PROTECTED] with
>                        "unsubscribe" as the Subject.


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to