SV: Network Setup Opinion Needed

[Enroth Björn]

Hi,   Why complicate things when not needed? The only thing you can gain from separating the clients is less broadcast, and maybe some increased security between the groups of clients. The Linux box would also have more to do in your second option. My suggestion is that you go for option 1. Remember to NOT set any default gw at the internal interface. This could confuse the routing daemon.   Regards /Bjorn -----Ursprungligt meddelande----- Från: Harish Sabnani [mailto:[EMAIL PROTECTED] Skickat: den 29 september 2003 19:45 Till: [EMAIL PROTECTED] Kopia: [EMAIL PROTECTED] Ämne: Network Setup Opinion Needed Hi Ed, Thank you for taking interest in my queries,I need a suggestion from you on the way I should set up my network,I had posted this mssg on the mailing list but had no response,hence I am mailing this to you,your suggestion will be highly appreciated.   Hi All, I have set up a Linux Box with NAT/MASQ, and Squid as an Internet server for my local LAN with one system on a trial basis and I see that the performance has been great.However I am apprehensive about the way the way traffice and loadbalancing will be hadled by Linux box as there will be 50 Machines  banging in with requests,hence I have thought of two ways to connect,pls have alook below and pass your valuable comments. I have a 128 Kbps leased line coming thru a router. Option1 50 Windows Cleints with IP Adressese 192.168.0.1-50 GW 192.168.0.100 Linux Server Eth0 with Ip Adress 212.72.11.89 GW 212.72.11.201 Linux server Eth1 with Ip Address 192.168.0.100 GW 192.168.0.100 so I will use Ip NAT/MASQ techniques  where all requests on Eth1 will be forwarded to Eth0. Option 2 3 Sepearte Networks Network 1 Ip addresses 192.168.0.1-15 Network 2 Ip addresses 192.168.1.1-15 Network 3 Ipaddresses 192.168.2.1-20 Linux Server Eth0 with Ipaddress  212.72.11.89 GW 212.72.11.201 Linux Server Eth1 with Ipaddress 192.168.0.254 GW 212.72.11.89               Eth2 with Ipaddress 192.168.1.254 GW 212.72.11.89               Eth3 with Ipaddress 192.168.2.254 GW 212.72.11.89 In this case I will have to NAT all requests from Eth1,Eth2,Eth3 to Eth0. Router Details Serial IP 212.72.11.202 Mask 255.255.255.252 Network 212.72.11.88    Mask 255.255.255.248 Gatway  212.72.11.201 Host Ips 212.72.11.89          212.72.11.90          212.72.11.91          212.72.11.92          212.72.11.93          212.72.11.94          212.72.11.95                I have abt 6 dedicated host Ips is there a better way I can utilise this,Pls suggest, I dont want to have a dedicated FTP or webserver. Thanks and regards Harish