Help
Im a newbie trying to find the light by installing RH 5 as a test platform
to show my work that it is a viable option for our intranet (other ones we
are looking at are NT 5 with IIS and Netware 5 with FastTrack Enterprise),
on glitch however....
I am having a hell of a time getting an ISA SMC Card to work properly under
RH 5.0
I cant put a PCI card in as all of the PCI slots are being used (4 of them)
It is a SMC UltraEZ 8514 10baseT card. It works under Netware 5 and WinNT
5 on the same machine, so it is not a matter of the card being "bad"
I have tried
insmod ne.o io=0x2c0 irq=5
no luck there, I get errors saying something about loading other modules.
I tried
LILO: Linux ether=5,0x2c0,eth0
no luck there, when I run ifconfig eth0 does not show up.
I tried in Xfree86 running the kernelcfg, my SCSI card shows up there, I
click on add, added the ne module, assisgned the io and irq, clicked on
restart kerneld, clicked on quit then reran kernelcfg, the ne.o module
disappears.
Also, I am having problems understanding the route command. I looked in
the o'reily books, but the syntax is different it looks like.
Can someone give me an example of routing with the following IP addresses:
Computer IP 198.70.120.250
gateway: 198.70.120.1
mask 255.255.255.0
dns: 198.70.121.141
Thanks for all your help
Jim McMurry mailto:[EMAIL PROTECTED]
System Support Supervisor
MIS Department
Exponent
Failure Analysis Associates, Inc. Phone: (650)688-7135
149 Commonwealth Drive FAX: (650)688-7269
Menlo Park, CA 94025-3015 http://www.exponent.com
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.