Hello All, I'm kind of up a creek here and am hoping someone can bail me out. Sorry for my ignorance, but here's the situation..... I have a v2.2.11 system to which I applied the raw-2.2.11-pre1.diff patch from raw-19990728. I applied the patch, #mknod /dev/raw c 162 0 through #mknod /dev/raw4 c 162 4, #chmod 600 /dev/raw* and tried to do a #raw /dev/raw1 /dev/sdb1 through #raw /dev/raw4 /dev/sde1 to bind the raw devices to the block devices. When I try to do a bind, I get an error of "Cannot open master raw device 'dev/raw' (No such device)". /dev/raw is listed in /dev.....what am I missing? Is there something else that I forgot to do? Also, after I applied the patch, I am getting an error on the #make install while trying to recompile the kernel. The error is as follows: memory.c: In function `get_page_map': memory.c:1005: `ZERO_PAGE' undeclared (first use in this function) memory.c:1005: (Each undeclared identifier is reported only once memory.c:1005: for each function it appears in.) make[2]: *** [memory.o] Error 1 make[1]: *** [first_rule] Error 2 make: *** [_dir_mm] Error 2 What am I doing wrong? Any suggestions are greatly appreciated! Thanks for your help. Heather -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.