if you can burn a regular cd, go into xcdroast, choose "SCSI/IDE-info" and
use the id and lun that it uses for the writer. In my case it was id=3,
lun=0. dont specify the scsibus.
see if that helps
Also, I compiled xcdroast from the .src.rpm. You could try that if the
above doesn't work.
charles
On Sun, 19 Dec 1999, cajun wrote:
>
> Xcdroast ver 0.96e. I don't specifically remember the errors with Xcdroast
> other than I wasn't able to burn a CDRW (it's been a while).
>
> When I try to erase a CDRW using 'cdrecord blank=fast dev=1,4,0' , I get
> this:
>
> Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling
> scsidev: '1,4,0'
> scsibus: 1 target: 4 lun: 0
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 2
> Capabilities :
> Vendor_info : 'HP '
> Identifikation : 'C4324/C4325 '
> Revision : '1.27'
> Device seems to be: Philips CDD-2000.
> Using driver for Philips CDD-522 (philips_cdd522).
> Driver flags :
> CDB: 00 00 00 00 00 00
> Sense Bytes: F0 00 02 80 00 00 3E 0A 00 00 00 00 3A 00 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> Sense flags: Blk -2147483586 (valid)
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
