> -----Original Message-----
> From: Ward William E PHDN [mailto:[EMAIL PROTECTED]]
> Sent: Monday, April 03, 2000 12:21 PM
> To: '[EMAIL PROTECTED]'
> Subject: RE: Dual eth question - changing eth0 & eth1
>
> This may not be an option if he has an ISA 10Mb card and a
> PCI 100Mb card.
> The PCI card may just be recognized SOONER.... in which case,
> he somehow
> needs to bring up eth1 before eth0... and how he does that, I
> don't know.
>
> That said, 100Mb cards are CHEAP... he could probably go ahead and
get
> a PCI 100Mb card to take care of the problem for ~$20.

That may or may not work, depending on what the 10MB card is connected
to. Some DSL/cable modems will not work with a dual speed NIC, they
must have a 10MB only NIC.

That said, I'm not sure what the big issue is. My firewall has two
NICs. Eth0 is the static private network and Eth1 is the DHCP assigned
DSL connection. Works fine. Would work fine the other way, too.

In my mind, the only big issue would be if the PC is INCONSISTENT in
assigning cards on boot. Now that would be a PITA!


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to