Bill Sandiford wrote:
> Help :
>
> I need a hand (or point in the right direction) for setting up redhat as a
> dial on demand router. I already have the ppp connection configured and
> working properly. What I need to do is figure out how to make it
> automatically dial when it receives traffic headed for the internet on the
> network interface, and then drop the call after a small idle timeout.
>
> I have read the PPP Howto which deals with how to automate the dial process
> using the pppon script but that still requires a human to type pppon...what
> I need is for the interface to automatically come up when there is traffic
> and automatically go down when the traffic is done.
>
look at the demand option to ppp. It does exactly this, There is a thread
about six moths ago discussing my experience with this. The only problem I
really had was that the ifup ppp script would hang until the interface
actually came up. seems like I put a pind in the scripts somewhere to
kickstart it.
>
> Also, how do I add a network card to the machine...I have added a new card
> but it did not detect it. It is a Realtek Based ISA Card.
>
Look at the www.redhat.com/support comaptability list and find out which
module needs to be loaded and use linuxconf to add the interface in the basic
host information under client tasks select the module name there. What this
will do is set the address in the proper files and add the module to the
/ect/conf.modules so the kernel can find it at boot.
To test you can insmod the module manually and then do ifup eth0. This
assumes that you have made all the proper entries.
Hope this gets you going.
Bret
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.