On Tue, 1 Aug 2000, Stephen Liu wrote:
> Hi Mikkel,
>
> Thanks for your assistance. cdrecord-1.9-2.src.rpm has been rebuilt,
> compiled and installed in accordance to your advice without problem.
> However I could not locate the manual/instruction for its
> starting/operation.
>
> CDWriter Icon has been created on KDE desktop. After having 'iso9660'
> (file type of cdrom1) changed to 'auto' inside "fstab" both CDR and CDRW
> disc can be mounted and read as well.
>
> However I could not find any location/device to invoke "cdrecord" nor have
> any idea how to create an icon with link
> to start it. Besides "locate" command could not find the directory
> of cdrecord-1.9.2
>
Look in /usr/doc/cdrecord-1.9 for some of the documention. man cdrecord
will also give you information on how to run it. Cdrecord is a command
utility. If you want to burn CD's from X, you might want to try
xcdroast. You will also find the CD-Writing-HOWTO helpfull. It should
be in /usr/doc/HOWTO.
> Kindly advise how to check whether compilation and installation has been
> completed and how to start writing CDR
> and CDRW disc
>
>From the command prompt, or from an xterm, type "cdrecord -scanbus". It
will check to see if you have a CD writter that it know about. As long
as the command runs, you have cdrecord installed.
If you still have problems after reading the man pages, and the howto,
write again.
>
> Thanks in advance.
>
> Stephen
>
> (Furthermore what will be the difference for files having .i386, i586 and
> i686 extension)
>
The .i386, i586, and i686 tell you the processor it was optimized to run
on. A i.386 will run on anything form a 80386 up. A i586 is optimized
for pertium systems, and the i686 are pentium II. Most of the utility
programs are i386 so that they will run on any machine.
Mikkel
--
Do not meddle in the affairs of dragons,
for you are crunchy and taste good with ketchup.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.