On Tue, 10 Oct 2000, James wrote:
> I've been having a very puzzling problem setting up a home LAN.
>
> I can ping localhost, and I can ping my ethernet card without problems. I
> have swapped out the card itself, changed IRQ & IO address, and checked the
> cable and hub. Right now the card is a WD8013.
>
> I'm only trying to get two machines to talk to each other via ethernet, so
> my routing table is very short and sweet.
>
Hmm...have you verified that you're using "straight-through" cables
between the hub and the two machines? If one of 'em is using a
twisted/cross-over cable, that would indicate some of the problems.
Another good test -- see if you can ping the linux box from the
windows machine and see if the linux box can ping itself on the eth0
IP address. At least this will let you know where the problem lies.
If you can ping the linux box from the windows machine, but you can't
ping the windows box from the linux box, you know there's a problem
on the linux box... AND if you can ping the eth0 interface from
within the linux box, but can't ping the Windows machine from the
linux box, you can be pretty sure there's a config error there
somewhere.:-)
If you've already tried this (you didn't say what other tests you'd
run) I'm at a loss unless you want to try a different ethernet card
in the linux box....
John
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list