just because kudzu found it, doen't mean it's configured, or brought
up. You should find it quite obvious to setup properly using linuxconf or
netconf, or manually setting up files in /etc/sysconfig/network-scripts.
Then to start it do
ifup eth0
and use ifdown eth0 to stop it.
hth
charles
On Wed, 15 Nov 2000, ShaneMRyan wrote:
> I installed a Kingston ethernet card into my linux box. Kudzu found
> it, and it uses the tulip driver. However, an ifconfig doesn't show
> it. If I run, "ifconfig eth0", it will show some info about it. I am
> dual booting WinME. This box is connected via a cross over cable to a
> W2K box. When windows ME is started, I can ping my W2K server.
> However, when I assign a static ip on the same class c subnet to the
> linux box I can't ping the W2K box through the crossover cable. Any
> hints with using linux and ethernet nic cards?
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
