that's not dangerous....
you set IP alias too much....
go to netconf....and disable all IP Aliases...

*Pells

----- Original Message -----
From: "Peter Peltonen" <[EMAIL PROTECTED]>
To: "RH List" <[EMAIL PROTECTED]>
Sent: Friday, February 02, 2001 11:52 PM
Subject: eth0 errors


>
> I am getting these error messages now and then:
>
> --snip--
> Feb  2 18:44:13 dmz53 kernel: eth0: Transmit timed out: status 0050  0080
> at 65408/65419 commands 000c0000 000c0000 000c0000.
> --snip--
>
> This is a linux router/firewall and eth0 is the interface where a lot of
> traffic is goint through.
>
> Is this dangerous? Is my eth0 breaking apart?
>
>
> eth0      Link encap:Ethernet  HWaddr 00:03:47:13:E5:73
> --line snipped--
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:440478 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:295300 errors:11 dropped:0 overruns:0 carrier:0
>           collisions:760 txqueuelen:100
>           Interrupt:11 Base address:0x1000
>
> eth1      Link encap:Ethernet  HWaddr 00:D0:B7:BD:9E:3D
> --line snipped--
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:95150 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:103665 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           Interrupt:10 Base address:0x3000
>
> eth2      Link encap:Ethernet  HWaddr 00:D0:B7:BD:9E:69
> --line snipped--
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:367199 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:502801 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           Interrupt:9 Base address:0x5000
>
> eth3      Link encap:Ethernet  HWaddr 00:02:B3:15:01:96
> --line snipped--
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:943 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           Interrupt:11 Base address:0x7000
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:3924  Metric:1
>           RX packets:40 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>
>
> In my dmesg is shown these kinds of messages (that I don't know what they
> mean):
>
> [root@dmz53 /root]# dmesg |more




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to