Okay, following Giulio Orsero's suggestion and turning off PnP on
the SCSi card, things seems to be progressing.
status gives me a different out put now. Before, it was telling me:
[root@c41:~]# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 0 bytes. Density code 0x0 (default).
Soft error count since last status=0
General status bits on (10000):
IM_REP_EN
Now, it says:
[root@c41:~]# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0. <- different
Tape block size 512 bytes. Density code 0x24 (DDS-2). <- different
Soft error count since last status=0
General status bits on (41010000): <- different
BOT ONLINE IM_REP_EN <- different
Hey, this is a good sign. It sees it now. It sees the tape (file
number, block number, tape blocks, density, and that it's online. Oh,
and the 'offline' command works now. Woo! Now I need to go try Arkeia,
see if IT works.
Thanks guys!
AMK4
--
W |
| I haven't lost my mind; it's backed up on tape somewhere.
|____________________________________________________________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130
SysAdmin / Websmith . 800.441.3873 x130
Photo Craft Laboratories, Inc. . eFax 248.671.0909
http://www.pcraft.com . 3550 Arapahoe Ave #6
.................. . . . . Boulder, CO 80303, USA
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list