Hi,
Did someone get the HP USB CD-Writer Plus 8230e working?
I hope someone can help me on this. I'm using RH7.1Beta and kernel
2.4.0-0.99.11.
I'm getting the following errors/warnings; the CD burner is represented
through /dev/scd1 (scsibus1)) and it's recognized of type CD-ROM
instead of CD-RW:
=======================================================================
/var/adm/messages:
Mar 3 21:15:06 alpha kernel: Product: USB UHCI Root Hub
...
Mar 3 21:15:07 alpha kernel: hub.c: USB new device connect on bus1/1, assigned device
number 2
Mar 3 21:15:07 alpha kernel: Product: HP USB CD-Writer Plus
Mar 3 21:15:08 alpha kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Mar 3 21:15:08 alpha kernel: Vendor: HP Model: CD-Writer+ 8290 Rev: 1.3C
Mar 3 21:15:08 alpha kernel: Type: CD-ROM ANSI SCSI
revision: 02
alpha:root# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'LG ' 'CD-ROM CRD-8400B' '1.10' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
cdrecord: Warning: controller returns zero sized CD capabilities page.
cdrecord: Warning: controller returns wrong page 1A for CD capabilities
page (2A).
1,0,0 100) 'HP ' 'CD-Writer+ 8290 ' '1.3C' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
alpha:root#
alpha:root# cdrecord -blank fast /dev/scd1
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
scsidev: 'yamaha'
devname: 'yamaha'
scsibus: -2 target: -2 lun: -2
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
root.
alpha:root#
Here are some outputs from some files:
======================================
alpha:root# cat /proc/scsi/usb-storage-0/1
Host scsi1: usb-storage
Vendor: HP
Product: HP USB CD-Writer Plus
Serial Number: None
Protocol: 8070i
Transport: SCM/ATAPI
GUID: 03f002070000000000000000
alpha:root#
alpha:root# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ff00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=03f0 ProdID=0207 Rev= 0.01
S: Product=HP USB CD-Writer Plus
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=ff Driver=usb-storage
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 5ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
alpha:root#
When I'm running 'cdrecord -scanbus' I'm getting the following debug
information:
====================================================================
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command INQUIRY (6 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 12 00 00 00 24 00 00 00 00 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 36 of 36 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 05 80 00 21 5B 00 00 00 48 50 20 20 20 20
20 20
Mar 3 21:51:05 alpha kernel: usb-storage: 43 44 2D 57 72 69 74 65 72 2B 20 38 32 39
30 20
Mar 3 21:51:05 alpha kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 5a 00 3f 00 00 00 00 00 08 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 8 of 8 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 5A 00 5A 00 5A 00 5A 00
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 00 00 00 00 00 00 00 00 08 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 5a 00 2a 00 00 00 00 00 02 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 2 of 2 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 00 B8
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 5a 00 2a 00 00 00 00 00 ba 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 186 of 186 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 00 B8 00 B8 00 B8 00 B8 00 B8 00 B8 00 B8
00 B8
Mar 3 21:51:05 alpha kernel: usb-storage: 00 B8 00 B8 00 B8 00 B8 00 B8 00 B8 00 B8
00 B8
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 00 00 00 00 00 00 00 00 ba 00 00 00
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 5a 00 2a 00 00 00 00 00 c2 00 32 c0
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 30 of 30 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 00 1C 11 00 00 00 00 00 2A 14 07 07 71 63
29 23
Mar 3 21:51:05 alpha kernel: usb-storage: 10 8A 01 00 08 00 10 8A 00 00 02 C2 02 C2
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Mar 3 21:51:05 alpha kernel: usb-storage: queuecommand() called
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread awakened.
Mar 3 21:51:05 alpha kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Mar 3 21:51:05 alpha kernel: usb-storage: 5a 00 2a 00 00 00 00 00 1e 00 32 c0
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 14 of 14 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred out 12 of 12 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: Waited not busy for 0 steps
Mar 3 21:51:05 alpha kernel: usb-storage: Transferred in 30 of 30 bytes
Mar 3 21:51:05 alpha kernel: usb-storage: 5A 00 5A 00 5A 00 5A 00 5A 00 5A 00 5A 00
5A 00
Mar 3 21:51:05 alpha kernel: usb-storage: 5A 00 5A 00 5A 00 5A 00 5A 00 5A 00 5A 00
Mar 3 21:51:05 alpha kernel: usb-storage: scsi cmd done, result=0x0
Mar 3 21:51:05 alpha kernel: usb-storage: *** thread sleeping.
Here are some information from the .config file in /usr/src/linux:
==================================================================
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=4
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DEBUG_QUEUES is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_OLD_PROC_STATS=y
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_NCR53C8XX_PROFILE=y
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PCI2000=m
CONFIG_SCSI_PCI2220I=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLOGIC_QLA2100=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_DEBUG=m
......
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
#
# USB Controllers
#
CONFIG_USB_UHCI=y
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_WACOM=m
#
# USB Imaging devices
#
CONFIG_USB_DC2XX=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_IBMCAM=m
CONFIG_USB_OV511=m
CONFIG_USB_DSBR=m
CONFIG_USB_DABUSB=m
#
# USB Network adaptors
#
CONFIG_USB_PLUSB=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_NET1080=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_OMNINET=m
#
# USB misc drivers
#
CONFIG_USB_RIO500=m
Thanks
Werner
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
