Fred: I am in the radio industry as a DJ and recording engineer as well so I might be able to help with the audio stuff. I am currently working on a radio automation system in perl.
Anyway, the first thing I would ask is--is there a pre-amp between the turntable and the input of the sound card? Turntables need a pre-amp of some kind. If nothing else, Radio Shack has them or your can pick up a cheap DJ mixer that will do it for you. Secondly, make sure you are not using the MIC input to record, it is set high to deal with the voltage requirements of a MIC and not a Line Input. Setting the volume low is not really a surprise, I have experimented with recording music from my satellite dish and have to set the input volume at below 30 to get a good balance. Just FYI--I have been using mpegrec from the command line and left it run for 8 hours last night just to see how it would handle the time, the file size and to see if it worked better than the GUI program I was using on Windows 2000. Happy to report it worked GREAT! Turned out a 500+ meg file and it plays just fine with no skipping. HTH -Scott On Thu, 27 Dec 2001, fred smith wrote: > I'm working on learning how to rip audio off vinyl LPs so I can turn some > of my 30-40 year old collection of LPs into CDs. > > I'm having trouble, I believe, with my soundcard, Creative AudioPCI, > which uses the es1371 driver. > > I've used both gramofile and snd to capture some sound from the turnable, > and in both cases get quite a bit of distortion even though both tools > report that I have NOT had a high enough level to drive the system into > clipping (gramofile reports only a small number of samples above 90%, > NONE above 99, and NONE clipped). Using SND, the VU meters never go > above about 75-85% but the same distortion occurs. > > IF, OTOH, I reduce the input gain so that the VU meters hover around > 50%, the audio is not audibly distorted. > > trouble with this, of course, is we lose dynamic range. > > Am I stuck with doing it this way? Is it an issue with the sound card, > or is there some trick to adjusting the mixer's controls? Or am I > destined to have to buy a new sound card so I can accomplish this > task? > > If I need a new card, I'm open to suggestions (but I'm not made out > of money!) > > Thanks! > > Fred > -- _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
