Hello Badger, Wednesday, December 26, 2001, 1:59:41 PM, you wrote:
B> Hello , B> I'll try the list again... First, I've searched the archives and B> found no info on my problem with RH 7.1, maybe someone on the list B> can help. B> I have a fresh install of 7.1 and when I do a "shutdown -h now," the B> machine goes through the normal shutdown until it gets to the point B> where it says "removing all md devices" - this is just after the B> point where it says "halting system." When the process gets to the B> "removing all md devices," the console suddenly starts fast B> scrolling a whole bunch of hex codes and some plain text. B> At first I thought it might be the hard drive, but it does the same B> on a different hard drive - both drives know to work. I then B> manually "rmmod" all modules before shutting down and still have the B> same problem. The machine will not shutdown unless I power it B> down, it will continue to scroll the hex characters accross the B> console. The machine is a 200Mhz pentium MMX - this is a known good B> machine under RH 6.0. The machine is a only being used as a B> firewall using iptables, I removed ipchains, so it is a little scary B> not knowing what the heck is going on with the box. B> If anyone has ever experienced this or knows what's broken, I would B> like to hear from you. B> Regards, Thanks, I found out that it is the motherboard in the machine, but I don't know why. The same motherboard worked fine with pre 7.x rh distributions. -- Best regards, Badger mailto:[EMAIL PROTECTED] _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list