Hi - I'm having problems with my test server at home (basically a machine that was 
found in the street, cleaned up and is now our home firewall / router / server / my 
test environment)

anyway - since I found the machine I don't really know it's history - but am having a 
problem that I've not really seen on any computer before where if I try to reboot the 
machine it goes through all the shutdown process, gets to the "rebooting system" 
message where it would normally do a soft reset, then it just hangs there... 

I then have to press the reset button on the box to get the reboot to continue. makes 
it a bit crap if I end up having to reboot the server remotely...

just wondering if this is likely to be a hardware problem, and if there is some stuff 
anyone can think of that I should start checking to resolve this.

it is quite possible (probable) that the jumpers on the motherboard are set wrong - 
the machine was locking up for a few days and when checking the jumpers found the 
person who built the machine had set the CPU voltage jumper to 2.8 v - as opposed to 
2.9 as listed on the CPU. since upping the voltage the server hasn't locked up again - 
although I'm now having strange VGA interference whenever the CPU load is up... 

anyway - would be great to get these little niggling problems sorted... any pointers 
or reference to information sites would be most appreciated!

thanks in advance...

- dan.



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to