On 05/21/02, 03:19:55PM -0700, Samuel Flory wrote: > It get's every easier once you find /etc/cdrecord.conf;-)
Actually, I tried to get the scsi bus setting detected via cdrecord.conf by using the CD-RW label as shown in -scanbus, but I must have gotten it wrong. My /etc/cdrecord.conf (edited) looks like this: # This file is /etc/cdrecord.conf # Inserted device line below, 4/31/02 jpv CDR_DEVICE=SONY DR_SPEED=4 # The default FIFO size if, not specified elsewhere CDR_FIFOSIZE=4m # End /etc/cdrecord.conf The CDR_DEVICE entry was based on -scanbus output of this (again, edited): scsibus0: 0,0,0 0) 'LG ' 'CD-ROM CRD-8480C' '1.04' Removable CD-ROM 0,1,0 1) 'SONY ' 'CD-RW CRX100E ' '1.0m' Removable CD-ROM The man page indicates that is if the CDR_DEVICE matches the -scanbus, the dev option should not be needed. I found it was. -- John P. Verel Living Proof That Low Tech Beats High Tech! _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list