Mine looks like this:

CDR_DEVICE=cdrom
# drive name    device  speed   fifosize driveropts
cdrom=          0,0,0   10      4m      ""




John P Verel wrote:
> On 05/21/02, 03:19:55PM -0700, Samuel Flory wrote:
> 
>>   It get's every easier once you find /etc/cdrecord.conf;-)
> 
> 
> Actually, I tried to get the scsi bus setting detected via
> cdrecord.conf by using the CD-RW label as shown in -scanbus, but I must
> have gotten it wrong.  My /etc/cdrecord.conf (edited) looks like this:
> 
> # This file is /etc/cdrecord.conf
> # Inserted device line below, 4/31/02 jpv
> CDR_DEVICE=SONY
> DR_SPEED=4
> # The default FIFO size if, not specified elsewhere
> CDR_FIFOSIZE=4m
> # End /etc/cdrecord.conf
> 
> The CDR_DEVICE entry was based on -scanbus output of this (again,
> edited):
> 
> scsibus0:
>       0,0,0     0) 'LG      ' 'CD-ROM CRD-8480C' '1.04' Removable CD-ROM
>       0,1,0     1) 'SONY    ' 'CD-RW  CRX100E  ' '1.0m' Removable CD-ROM
> 
> The man page indicates that is if the CDR_DEVICE matches the -scanbus,
> the dev option should not be needed.  I found it was.
> 




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to