On Thu, Jun 13, 2002 at 11:20:02AM +0200, Claudio Delgado wrote: > Hello , somebody knows which file I need to modify for my linux machine > runs at 10Mbs or 100Mbs? Thanks
Actually, I'm trying to find some information about this myself. I have a server with a quad-port PCI ethernet card, made by Tulip. This is what dmesg shows: Linux Tulip driver version 0.9.15-pre2 (May 16, 2001) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip0: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth1: Digital DS21143 Tulip rev 65 at 0xcc00, 00:80:C8:B9:C0:58, IRQ 11. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip1: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth2: Digital DS21143 Tulip rev 65 at 0xc880, 00:80:C8:B9:C0:57, IRQ 9. tulip2: EEPROM default media type Autosense. tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth3: Digital DS21143 Tulip rev 65 at 0xc800, 00:80:C8:B9:C0:56, IRQ 3. tulip3: EEPROM default media type Autosense. tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1. eth4: Digital DS21143 Tulip rev 65 at 0xc480, 00:80:C8:B9:C0:55, IRQ 10. I have connected eth4 to an HP4000M core switch at our provider, and that switch port is set to 100MB, full-duplex. However, the message in the /var/log/messages file of this server shows: Jun 11 16:35:25 ETR1500 kernel: eth4: Setting half-duplex based on MII#1 link partner capability of 0081. Is there any way I can force this eth4 port to full duplex? I tried to look in the ifconfig man page, but I could not find any relevant option. -- Anand Buddhdev http://anand.org _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list