On Tue, 9 Jul 2002, Jason Costomiris wrote: > On Tue, Jul 09, 2002 at 01:52:15PM -0700, John Telford wrote: > : I'm building routers. It's difficult to tell in advance which NIC will > : be assigned eth0 and which will assigned eth1 when using two NICs. Ping > : testing usually clears up this simple problem. > > It's largely voodoo that probably only the guy who wrote the pci > bus scanning code understands. You might as well get into the habit > I got into on other platforms. As you install the NICs, print a label > with the MAC address of the card and attach it as you insert the cards. > At that point, determining which card is which takes 5 seconds. > > Additionally, it makes it easier for anyone who follows you to identify > the various NICs in the machine.
So far, my limited multi-NIC host experience says that the eth0, eth1, ... labeling follows the pci bus labeling (slot1, slot2, ... so on) The mac address labeling is an excellent idea BTW. _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
