i've just installed a second hard drive, it's auto detected, etc. i edited lilo.conf to be sure lilo is run from the master boot record of the master drive and to be sure lilo gives me the option to boot into w2k. then i issue the "lilo" command, and it says 'added linux added win'.
right? then i shutdown -r now and hope for the best. i get the lilo menu with linux and win, i select win, and i get a 'loading windows' message but nothing happens.... see output from dmesg | grep 'hd.*' [rebecca@localhost rebecca]$ dmesg | grep 'hd.*' Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz-2.4.7-10 hdd=ide-scsi ide_setup: hdd=ide-scsi ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 91301U3, ATA DISK drive hdb: WDC WD1000BB-00CAA1, ATA DISK drive hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive hdd: R/RW 2x2x24, ATAPI CD/DVD-ROM drive hda: 25410672 sectors (13010 MB) w/512KiB Cache, CHS=1581/255/63, UDMA(66) hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=4111/255/63, UDMA(66) hda: hda1 hda2 hda3 hdb: hdb1 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) and see lilo.conf: prompt timeout=50 default=linux boot=/dev/hda map=/boot/map install=/boot/boot.b message=/boot/message linear image=/boot/vmlinuz-2.4.7-10 label=linux initrd=/boot/initrd-2.4.7-10.img read-only root=/dev/hda2 append="hdd=ide-scsi" other=/dev/hdb1 label=win i had : other=/dev/hdb label=win gave same results as hdb1 any help at all would be incredibly appreciated. __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list