This (missing cable) appears to be the problem. I was fooled into thinking that it couldn't be a hardware problem because it works under Windows XP.. But I found an old message in one of the linux news groups which explained that Windows uses a different means to get the sound and doesn't depend on the sound cable. I opened up my system and, sure enough, there is no sound cable from the CD-ROM to the sound connector on the motherboard, so I'm assuming that putting one in will fix it.
One puzzlement - the CD-ROM has 2 audio connectors: a 2-pin connector for digital audio and a 4-pin connector for analog audio. Which one do I use? And the mother board has a 3-pin audio connector!. Is there a 4-to-3 or 2-to 3 audio cable that goes there? And is it safe to assume that the DVD player which I transplanted from a dead Compaq PC to my PC will also need an audio cable (there's a secondary audio connector on the mother board)? Thanks for all your help. Rich "Sounds of Silence" Kimball >From: linux power <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: Silent audio CD's >Date: Wed, 25 Sep 2002 10:30:16 +0200 (CEST) > >Also open up you box and check if you have a cable >between the cd-rom and sound card. > > > --- "Willem van der Walt<[EMAIL PROTECTED]>" ><[EMAIL PROTECTED]> skrev: > hi, > > Check under your mixer settings that the volume of > > the cd itself is set > > high. > > Also doublecheck that your speakers are connected to > > the correct output on > > your > > sound card. I have a simmelar situation where I do > > not get sound > > on the one channal, but on the second channal > > connected to my high fi, > > the cd plays. > > I have a soundblaster live card. > > Playing audio files work on both channals. > > I found a cdda player on the net a few years ago > > called cddaplay which can > > play the cdda files on a cd. > > hth > > Willem > > > > On Tue, 24 Sep 2002, Richard Kimball wrote: > > > > > I have a dual boot machine with XP on one drive > > and RH 7.3 on the other. > > > When I play a sound CD under XP, everything works > > fine. When I try to play > > > one under RH, the CD Player app correctly > > identifies the CD and starts > > > playing it, but no sound comes out. I've checked > > the volume settings in > > > GMIX and they're set high enough. If I play a > > .mpg file I get sound. Any > > > ideas what's going on? > > > > > > Thanks, > > > Rich Kimball > > > > > > > > > > > > > > >_________________________________________________________________ > > > Chat with friends online, try MSN Messenger: > > http://messenger.msn.com > > > > > > > > > > > > > > > > -- > > Willem van der Walt > > Information Services Directorate > > Department of Health > > South Africa > > tel: 27 12 3120700 > > > > > > > > > > -- > > redhat-list mailing list > > unsubscribe > > >mailto:[EMAIL PROTECTED]?subject=unsubscribe > > https://listman.redhat.com/mailman/listinfo/redhat-list > >______________________________________________________ >Se den nye Yahoo! Mail p� http://no.yahoo.com/ >Nytt design, enklere � bruke, alltid tilgang til Adressebok, Kalender og >Notisbok > > > >-- >redhat-list mailing list >unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe >https://listman.redhat.com/mailman/listinfo/redhat-list _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
