Hi:

I just installed RH7.2 on a PIII with a 2.5 in Harddisk and the following
error
message shows up during boot. hda1(/boot) hda2(/) are mounted but not the
reset partitions(/home, /usr, /tmp, /var). Can anyone help ? Thanks,

block: queued sectors max/low 168037kB/56012kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 0
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
hda: TOSHIBA MK3017GAP, ATA DISK drive
hdb: FX140S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 58605120 sectors (30006 MB), CHS=3648/255/63, UDMA(33)
ide-floppy driver 0.97

>>Partition check:
 >>hda:hda: timeout waiting for DMA
>>ide_dmaproc: chipset supported ide_dma_timeout func only: 14
>>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>>hda: drive not ready for command
>>hda1 hda2 hda3
>>hda: timeout waiting for DMA
>>ide_dmaproc: chipset supported ide_dma_timeout func only: 14
>>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>hda: drive not ready for command

Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.

Jim




-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to