Kent Borg wrote:
> 
> I now try to run lilo (the version on my disk) to put a master boot
> record on the /dev/hdc disk and can't do it.  OK, so I tried running
> the newer lilo that comes on the Knoppix CD.  It lets me specify what
> disk to install on, but it still won't boot.  Dang!
> 


You have a couple of choices here.

If hda dies, you can boot on hdc if your BIOS supports it. If not (and
you have loaded the boot loader on hdc as well as hda) then move the
hdc drive to the primary channel and boot from it. A better solution,
however, is to prepare for the inevitable before it arrives.  

Make a bootable diskette:  mkbootdisk --verbose --mkinitrdargs
'--preload raid1' $(uname -r) so that you can boot from floppy and
access your RAID array.  When a drive dies, you only need install the
new drive and boot from floppy, fdisk the new drive and make the
appropriate partitions (marked as type fd), then raidhotadd the
partitions back into your mirror set.  When you're up-and-running you
can then use LILO or GRUB to make the new drive bootable.

Barry

-- 
Please avoid sending me Word, PowerPoint or Excel attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to