Your system is set to get the IP via DHCP.  The system can't find a DHCP 
server.

You'll want to edit /etc/sysconfig/network-scripts/ifcfg-eth0, and chagne 
"BOOTPROTO=" from dhcp to none.

Then, you're going to want to set the IPADDR, and NETMASK fields to the 
correct values.

Then, run "service network restart" and you should be fine.

On Mon, 14 Oct 2002, Manuel Tejada wrote:

> My RedHat 7.2 was working very fine, no problem during booting. By the way,
> I boot it with a boot disk.
> But recently I was force to "renistall it" because when I installed windows
> 2000, the booting of RedHat was unable to find the initialization file.
> Now the "new" RedHat 7.2 is working "fine" but during the boot time it fail
> to activate the interface eth0. I see this message:
> "Activating interfaz eth0..........(it looks for something during almost 1
> minute)....Determining the information IP for eth0   FAILED". Then the
> booting process goes well.
> 
> Using the configuration network utility I found that the following
> information is registered:
> -Host: IP 127.0.0.1, Name localhost.localdomain, Alias localhost.
> -Hardware: Description RTL8139,SMC EZ Card Fast Ethernet    Type Ethernet
> Disp  eth0
> - Dispositivo:  eth0  Ethernet
> 
> My network card is Fast Ethernet Realtek RTL8139(a).
> 
> To me, the system has detected  my card and assigned the IP. Then my
> question is: WHY DURING THE BOOT TIME THE SYSTEM DOES NOT FIND THE IP?
> 
> Anyone can tell me why and how it can be fixed?
> 
> Thank for your answer
> 
> 
> 
> 

-- 
Mike Burger
http://www.bubbanfriends.org

Visit the Dog Pound II BBS
telnet://dogpound2.citadel.org or http://dogpound2.citadel.org:2000



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to