That's right...if it was set for DHCP, you wouldn't have those fields.

You'll have to add them.

IPADDR=your.ip.address.here
NETMASK=your.net.mask.here

On Mon, 14 Oct 2002, Manuel Tejada wrote:

> OK Mike
> 
> I can edit the ifcfg-eth0 file.
> But Could you tell me where are the IPADDR and NETMASK field please?
> And what is the command for "service network restart".
> 
> I am new in Linux
> 
> 
> ----- Original Message -----
> From: "Mike Burger" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, October 14, 2002 9:58 PM
> Subject: Re: The boot process can't activate interfaz eth0
> 
> 
> > Your system is set to get the IP via DHCP.  The system can't find a DHCP
> > server.
> >
> > You'll want to edit /etc/sysconfig/network-scripts/ifcfg-eth0, and chagne
> > "BOOTPROTO=" from dhcp to none.
> >
> > Then, you're going to want to set the IPADDR, and NETMASK fields to the
> > correct values.
> >
> > Then, run "service network restart" and you should be fine.
> >
> > On Mon, 14 Oct 2002, Manuel Tejada wrote:
> >
> > > My RedHat 7.2 was working very fine, no problem during booting. By the
> way,
> > > I boot it with a boot disk.
> > > But recently I was force to "renistall it" because when I installed
> windows
> > > 2000, the booting of RedHat was unable to find the initialization file.
> > > Now the "new" RedHat 7.2 is working "fine" but during the boot time it
> fail
> > > to activate the interface eth0. I see this message:
> > > "Activating interfaz eth0..........(it looks for something during almost
> 1
> > > minute)....Determining the information IP for eth0   FAILED". Then the
> > > booting process goes well.
> > >
> > > Using the configuration network utility I found that the following
> > > information is registered:
> > > -Host: IP 127.0.0.1, Name localhost.localdomain, Alias localhost.
> > > -Hardware: Description RTL8139,SMC EZ Card Fast Ethernet    Type
> Ethernet
> > > Disp  eth0
> > > - Dispositivo:  eth0  Ethernet
> > >
> > > My network card is Fast Ethernet Realtek RTL8139(a).
> > >
> > > To me, the system has detected  my card and assigned the IP. Then my
> > > question is: WHY DURING THE BOOT TIME THE SYSTEM DOES NOT FIND THE IP?
> > >
> > > Anyone can tell me why and how it can be fixed?
> > >
> > > Thank for your answer
> > >
> > >
> > >
> > >
> >
> > --
> > Mike Burger
> > http://www.bubbanfriends.org
> >
> > Visit the Dog Pound II BBS
> > telnet://dogpound2.citadel.org or http://dogpound2.citadel.org:2000
> >
> >
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
> > https://listman.redhat.com/mailman/listinfo/redhat-list
> 
> 
> 
> 

-- 
Mike Burger
http://www.bubbanfriends.org

Visit the Dog Pound II BBS
telnet://dogpound2.citadel.org or http://dogpound2.citadel.org:2000



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to