> On Wed, Oct 30, 2002 at 10:44:12PM -0600, christopher j bottaro wrote:
> > ok, i got a couple computers behind a linksys cable router. the way i setup
> > ntp is really simple. on each computer, i set the step-ticker to
> > clock.via.net in /etc/ntp/step-tickers. then i just had the service startup
> > at boot time by using redhat's setup utility.
>
You know in rereading this initial portion of the original message, I
was struck by the fact that no mention of ntp.conf was made. Isn't step
tickers just used by the redhat init scripts at startup? I always add
something like
server my.time.server.name
to /etc/ntp.conf
Seems like there is an issue with the broadcast client being enabled too
so I think I have had to comment it out.
here is the ntp.conf on my local time server that all the other local
machines look to.
[bhughes@bretsony bhughes]$ ssh gateway1 'cat /etc/ntp.conf'
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
#server now.okstate.edu prefer
server sushi.compsci.lyon.edu
#server ntp-wustl.usno.navy.mil prefer
#server constellation.ecn.uoknor.edu #OU timeserver
#server ntp1.kansas.net
server ntp-0.cso.uiuc.edu prefer
server ntp2.kansas.net
#server tock.greyware.com
#server tick.greyware.com
#server finch.cc.ukans.edu
#server ntp.cox.smu.edu
server ntp5.tamu.edu
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
broadcast 192.168.0.255
#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /etc/ntp/drift
#multicastclient # listen on default 224.0.1.1
broadcastdelay 0.008
#
# Authentication delay. If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
authenticate no
#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
#keys /etc/ntp/keys
#trustedkey 43565
#requestkey 83767
#controlkey 95024
here is the reuslts of ntpq -p against the machine running the above
ntp.conf
[bhughes@bretsony bhughes]$ ntpq -p gateway1
remote refid st t when poll reach delay offset
jitter
==============================================================================
LOCAL(0) LOCAL(0) 10 l - 64 377 0.000 0.000
10.010
192.168.0.255 0.0.0.0 16 u - 64 0 0.000 0.000
16000.0
sushi.compsci.l navobs1.wustl.e 16 u - 512 377 134.890 3.632
288.500
*ntp-0.gw.uiuc.e truechimer.cso. 2 u - 64 377 120.970 -36.845
74.430
+cisco1-mhk.kans navobs1.wustl.e 2 u - 64 377 57.250 -58.423
71.850
+ntp3.tamu.edu ntp1.tamu.edu 2 u - 64 367 67.550 -40.857
44.010
and for grins here is the same thing only with -n (numbers) added
[bhughes@bretsony bhughes]$ ntpq -pn gateway1
remote refid st t when poll reach delay offset
jitter
==============================================================================
127.127.1.0 127.127.1.0 10 l - 64 377 0.000 0.000
10.010
192.168.0.255 0.0.0.0 16 u - 64 0 0.000 0.000
16000.0
150.208.72.154 128.252.19.1 16 u - 512 377 134.890 3.632
288.500
*130.126.24.53 128.174.38.133 2 u - 64 377 120.970 -36.845
54.030
+199.240.130.1 128.252.19.1 2 u - 64 377 57.250 -58.423
43.000
+128.194.254.9 128.194.254.7 2 u - 64 357 65.510 -33.780
38.910
[bhughes@bretsony bhughes]$
HTH
Bret
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list