You need to know where /boot is on your system [the hd & partition number]
Boot from floppy, then login as root and run grub
*(this is actual output from my system)*
<snip>
GRUB version 0.92 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the
possible completions of a device/filename. ]
grub> find /boot/grub/menu.lst
(hd0,2)
grub> root (hd0,2)
Filesystem type is xfs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/xfs_stage1_5" exists... yes
Running "embed /boot/grub/xfs_stage1_5 (hd0)"... 25 sectors are
embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+25 p
(hd0,2)/boot/grub/stage2
/boot/grub/grub.conf"... succeeded
Done.
<snip>
Run 'setup' for each drive - this is what I have done in numerous
circumstances. After your last drive, try rebooting.
On Fri, 2002-11-15 at 05:47, SteelHead wrote:
> I picked up an old Intel JN440bx based server from ebay. it arrived loaded
> with WinNT and booted fine. I put a CDROM on the box and fought a cd boot,
> finally giving up and going on to Floppy boot.
>
> I have installed reinstalled RH 7.2 from retail successfully, as lomg as I
> want to boot from a floppy. I tried all options, LILO, GRUB, MBR, sda1 and
> only get a live system when booting from a floppy. grr!
>
> the scsi system is an adaptec 7880 reading as a 1000 array, 2 ibm drives and
> an assortment of cdroms (one at a time)
>
> We cannot seem to get past the boot from floppy point.
>
> I googled, and noted others have had tsimilar issues, but found no solutions.
>
> Please help, Bill
--
VB programmers ask why no one takes them seriously,
it's somewhat akin to a McDonalds manager asking employees
why they don't take their 'career' seriously.
signature.asc
Description: This is a digitally signed message part
