Hi Gagman,
Thanks for your reply, I tried to include the boot command "ide=nodma" but with no sucess.
All I get is:
Partition check:
hda: hda1 hda2 hda3
_
2pin.
-------Original Message-------
> From: [EMAIL PROTECTED]
> Subject: Re:
> Sent: Dec 10 2002 17:23:33
> I had a similar problem with RH7.3 which was caused
> when DMA was enabled. You might want to disable DMA
> in the kernel and see if it fixes it.
> On Tue, 10 Dec 2002, [EMAIL PROTECTED] wrote:
> > Hello all,
> >
> > I would happy if anyone has an idea why after
> > installing RH8.0 the machine
> > boots on it's own up until the partition check when it
> > halts after
> > displaying the hda etc. info. I do not think that the
> > problem is with the
> > partitions as I have tried many configurations (the
> > disk was empty). I can
> > boot up using the CD-ROM in rescue mode and it passes
> > the partition check
> > point. My PC has no floppy drive and this seems to be
> > the next thing checked
> > when booting (something is printed about ide floppy in
> > the good case), could
> > it be this that is the problem?
> >
> > Thanks in advance.
> >
> > 2Pin (:)
> >
> > P.S. SUSE 7.3 installs and boots OK, but I don't want
> > to use that at the
> > moment.
> __________________________________________________________
> Get your FREE personalized e-mail at http://www.canada.com
-------Original Message-------
