Hi all,
I just upgraded my system to a P4-2GHz which also involved a new
motherboard and video card but I kept the same harddisks.
The 2nd harddisk in the system I used to use under Windows but since I
repartitioned using that for Linux now.
Installed Red Hat 7.3 and noticed I am getting these errors reported for
the second harddisk (but not for the primary harddisk)
Dec 22 15:53:49 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:53:49 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:53:49 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:53:49 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:04 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 22 15:54:05 ws19 kernel: hdd: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Dec 22 15:54:05 ws19 kernel: ide1: reset: success
Everything *seems* to be running fine except for these errors. Could
these errors be caused by something else other than a hardware fault
developing?
How can I turn off DMA on the second harddisk to see if that helps? It
was autoselected by the Red Hat 7.3 installer.
--
Regards,
+-----------------------------+---------------------------------+
| Peter Kiem .^. | E-Mail : <[EMAIL PROTECTED]> |
| Zordah IT /V\ | Mobile : +61 0414 724 766 |
| IT Consultancy & /( )\ | WWW : www.zordah.net |
| Internet Hosting ^^-^^ | ICQ : "Zordah" 866661 |
+-----------------------------+---------------------------------+
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list