On Sun, Dec 22, 2002 at 07:49:46PM +1000, Peter Kiem wrote:
> Hi all,
>
> I just upgraded my system to a P4-2GHz which also involved a new
> motherboard and video card but I kept the same harddisks.
>
> Dec 22 15:53:49 ws19 kernel: hdd: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
The first thing I would check would be the cable running to your hard
drive. Make sure it's an 80-pin cable and that you're not using 40-pin
cables from your older system. Some hard drives demand you use a new
cable and some you can get away with older cables.
> Everything *seems* to be running fine except for these errors. Could
> these errors be caused by something else other than a hardware fault
> developing?
It's actually not fine...eventually you'll have disk corruption if you
don't fix the problem.
> How can I turn off DMA on the second harddisk to see if that helps? It
> was autoselected by the Red Hat 7.3 installer.
Look at /etc/sysconfig/harddisks and also man hdparm.
Cheers,
.../Ed
--
Ed Wilts, Mounds View, MN, USA
mailto:[EMAIL PROTECTED]
Member #1, Red Hat Community Ambassador Program
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list