what unit do you have?
you may need to replace the flow restrictor.
I had to in my spectrapure unit when I changed mine
----- Original Message -----
From: "Ben Holt" <[EMAIL PROTECTED]>
To: "Theil's reefkeeping" <[EMAIL PROTECTED]>
Sent: Thursday, August 16, 2001 7:49 PM
Subject: ro unit
> the other day i was making up some RO water and my garbage can filled up
> pretty quick. I filled 2 small cups with water from the RO. The clean
> water and waste water filled up almost at the same rate. I went out and
> bought new micron, carbon block and ro membranes today and just put thm
in.
> I then checked it again, this time the clean water was a little slower to
> fill then the waste water but not much ( about 1/2 inch from the top of
the
> 16 ounce cup) I don't think that this is right, iwas under the
impression
> that it should be about 4 to 1 ratio. Do the ro membranes need to have a
> break in period? If i am just putting tap water into my tank I'm not
going
> to waste my time fill garbage cans.
>
> thanks
>
>
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
