I have the manuals for your Research Line, Sensicon G, G strips, GE Pre-prog and pre Motracs.
Neil - WA6KLA [EMAIL PROTECTED] wrote: > > Repeater operation should require a Squelch Gate, > Station Control and hopefully a Time Out Timer > module. > > Base Station requires a line driver, and control > module(s), depending on dc or tone control. > > The Line Driver can be found in full or half > duplex 2/4 wire options. > > Jumpers need to be setup on the Modules and > Backplane. > > Moving high range strips down can be a pain, > better to swap into low range if you can find > them easy enough. Sell me your old high range > strips cheap. :-) > > The PA might operate at 40% rated power > without damage, which should be checked > before trusting my or anyone else's word. > > The mitrek is often considered the mobile > version of the MSR, they have a similar > line of construction and some parts do > interchange. Another less known radio was > the Motrek, a mitrek someone kept pulling > parts out of until it stopped working, > then put the last part back in and shipped > it out for sale. > > The Motrek and Mitrek strips will not > interchange with the MSR-2000 strips. > > If you wish to revist the Sensicon, G strips > or Research Line, I just found a batch in > a storage tub. Cousins to the GE Pre-Prog > and other pre-motrac back breakers. > > cheers > > skipp025 at yahoo.com > > > [EMAIL PROTECTED] wrote: > > Hey guys, > > I need some guidance from someone familiar with the MSR-2000 VHF > > station. I was just given one of these set up as a wire line > > remote/repeater and I thought I got the proper manuals with it. > > The 'radio manual' I was given is for a Micor and none of the > strips > > look anything like what is in the MSR. Are the strips from the > > Mitrek? The system manual is for the MSR 2000 and everything is OK > > there. Do I need a Mitrek manual? > > Also, this system was on 171 and 172 MHz. I'm thinking I should > > replace the rx and exciter strips to get this on 2M rather than do > a > > range conversion on what I have. Anyone got suitable strips for > swap > > or sale? Can I just rob strips from a suitable (Mitrek?) mobile? > > I have worked with MASTR II mobile conversion stuff lately. This is > > my first Motorola since I set up an 80D/Sensicon G a long time ago. > > Thanks! > > Conard, WS4S > > Upper Cumberland Amamteur Radio Association > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/