If it's an Advanced Controller, you have to flip a dip switch in order to
change channel frequency settings if memory serves. I don't have the manual
here and it's been a few years since I set one up; I'm sure somebody else
here will give you the details.
--- Jeff
---------
Jeff DePolo WN3A
Broadcast and Communications Consultant
> -----Original Message-----
> From: Larry Williams [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, January 14, 2004 11:32 AM
> To: Repeater-Builder@yahoogroups.com
> Subject: [Repeater-Builder] Purc 5000 programming??
>
>
> Hi, I have acquired a purc 5000 with the enhanced drawer that
> is programmable (supposedly without having to reprogram the
> eprom) from th e front panel of the unit. A friend is trying
> to program it and so far when he puts the new freq in, it
> seems to take, but when you go back in, it's still on the old
> freq. Someone suggested to us that the actual operating freq
> could only be changed by motorola. Anyone know for sure? I
> can provide all the unit numbers you might need.
>
> Thanks in advance
> Larry Williams
> KE4PCZ
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-> Builder/
>
> To
> unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
