Thanky, thanky. Will attempt it tomorrow. nj902 wrote: > > --- In Repeater-Builder@yahoogroups.com, "Jeff DePolo WN3A" > <[EMAIL PROTECTED]> wrote: > > > "If it's an Advanced Controller, you have to flip a dip switch in > order to change channel frequency settings if memory serves..." > ____________________________________________________________________ > > In order to change the transmit frequencies from the front panel, > switch 1 of DIP switch S801 on the Advanced Control Board must be set > to the ON position. > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/
Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/