Send me those leftovers lol !
Yes I will have to look again i think the variable is set as low as
it will go look's like 3 to 4 sec. id like it around 1 Ill take a
peak and see if i looked at it right :)
< : >
> I think I remember correctly - Its a simple variable resistor on the
> board in the bottom center of the chassis, next to the relay. On
the
> vertically mounted board to the side is CW tone, speed, and ID
timing
> I think, along with the CW
> programming. Careful of the exposed 120 leads laying around in
there.
> Mine was serial # 445 - Still have several of the left over parts
> here. Dave -//- NĜATH
> ----- Original Message -----
> From: "kf4vgx" <[EMAIL PROTECTED]>
> To: <Repeater-Builder@yahoogroups.com>
> Sent: Friday, January 30, 2004 4:38 PM
> Subject: [Repeater-Builder] Re: Shorten Tail SQ. on older Repeaters
>
>
> Thanks guys I was looking for an audio delay website .But the
> Repeater is a VHF Engineering seral no 1123
>
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-Builder/
>
> To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
