At 06:10 AM 3/30/2004 -0800, you wrote: >The receiver that is on the 440 machine is a Uniden >radio, for which we pulled the de-emphasized audio from. Then we used a >COR, which actually is nothing more than a voltage drop.
<---Well Mathew. It doesn't sound like you need a new receiver. That would be like throwing the baby out with the bathwater, no? It sounds like all you need to do is to get a decent COS signal from the Uniden you're using. That shouldn't be a huge deal. What are the levels you're seeing from the current "tap point"? It shouldn't take more than a couple of resistors and a transistor to get a "clean" source. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
