Sure it's easy to do, you can get Disc. Audio to run the decode right off the backplane and transmit can be input thru the backplane also to the PL input of the exciter. You should have both manuals for the station so you can find all the points. You need the RF manual and the Control manual.
I'd tell you the exact points but without the manuals you can't be sure everything is proper as sometimes if it was a Carrier Squelch station, the PL input path to the exciter may not be complete. Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA, WERA and ORC -----Original Message----- From: David Schornak [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 19, 2004 11:25 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] ts-64 and a micor repeater station has anyone installed a ts-64 into a micor base/repeater station? is so does anyone have the layout of where to make all the connections? if not is there a better way to get tone decode and encode on a micor without having to buy a tone encode and decode and the two reeds for them? Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/