With the talk of 2 rx'ers on one antenna...what about this;
I have purchased a RC210 for my repeater. Here is what on the repeater;
GE Mastr II UHF running 60 watts out of cans
ARR preamp
DB420 at 190'
TM-G707 remote base
Diamond Tribander at 125' (for remote base)
Moto. B/R 1500 series cans
I am wanting to stick a low powered UHF repeater on the same antenna.
This would be an optional control rx'er for the main repeater but will
run full time ISS audio (when FCC approved). This would be on the 3rd
port of the RC210. The low power repeater would probably be in the
442.000 range at about 5 to 10 watts. Would run one of the small mobile
duplexers.
I have heard about multi-couplers, etc. but not sure exactly what I will
need to make this happen. 2 questions....
1) How much desense will this cause?
2) What equipment will I need to make this happen (multi-couplers, etc.)
and what to expect on cost?
There is the ATL Hamfest coming up this weekend and will want to pick up
parts then. The other repeater will be stuff I have. (GE MVP, PPL6060 or
599's)
Ideas?
Thanks,
Robert
________________________________________________________________
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
