The spec is 8 seconds. -- Jim Barbour WD8CHL Q wrote:
> Our local system sends 3 seconds,must be valid for one full second...you > want some delay to prevent falsing. > ----- Original Message ----- > From: Kevin Bednar <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Saturday, June 05, 2004 6:56 PM > Subject: RE: [Repeater-Builder] Slightly off topic > > > >>Thanks much. Whats the min length for the tone to activate? >> >>Kev >> >>-----Original Message----- >>From: Q [mailto:[EMAIL PROTECTED] >>Sent: Saturday, June 05, 2004 6:53 PM >>To: Repeater-Builder@yahoogroups.com >>Subject: Re: [Repeater-Builder] Slightly off topic >> >>1050hz. >>----- Original Message ----- >>From: Kevin Bednar <[EMAIL PROTECTED]> >>To: <Repeater-Builder@yahoogroups.com> >>Sent: Saturday, June 05, 2004 6:51 PM >>Subject: [Repeater-Builder] Slightly off topic >> >> >> >>>Anyone know what tones need to be generated on a service monitor to >>>test >> >>the >> >>>alert function on a weather alert receiver? I'm looking to interface >>>one >> >>to >> >>>my repeater but want to test it and set the levels before I drag it up >>>to the site. TIA to all. >>> >>>Kevin >>>K2KMB Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
