That's what the Pittsburgh station sends... 8 seconds. Joe M.
Jim B. wrote: > > The spec is 8 seconds. > -- > Jim Barbour > WD8CHL > > Q wrote: > > > Our local system sends 3 seconds,must be valid for one full second...you > > want some delay to prevent falsing. > > ----- Original Message ----- > > From: Kevin Bednar <[EMAIL PROTECTED]> > > To: <Repeater-Builder@yahoogroups.com> > > Sent: Saturday, June 05, 2004 6:56 PM > > Subject: RE: [Repeater-Builder] Slightly off topic > > > > > > > >>Thanks much. Whats the min length for the tone to activate? > >> > >>Kev > >> > >>-----Original Message----- > >>From: Q [mailto:[EMAIL PROTECTED] > >>Sent: Saturday, June 05, 2004 6:53 PM > >>To: Repeater-Builder@yahoogroups.com > >>Subject: Re: [Repeater-Builder] Slightly off topic > >> > >>1050hz. > >>----- Original Message ----- > >>From: Kevin Bednar <[EMAIL PROTECTED]> > >>To: <Repeater-Builder@yahoogroups.com> > >>Sent: Saturday, June 05, 2004 6:51 PM > >>Subject: [Repeater-Builder] Slightly off topic > >> > >> > >> > >>>Anyone know what tones need to be generated on a service monitor to > >>>test > >> > >>the > >> > >>>alert function on a weather alert receiver? I'm looking to interface > >>>one > >> > >>to > >> > >>>my repeater but want to test it and set the levels before I drag it up > >>>to the site. TIA to all. > >>> > >>>Kevin > >>>K2KMB > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/