Re: [Repeater-Builder] FAA Paint Removal

[Q]

Ummm,you might try a high pressure power washer to remove the paint,mine did a great job of removing the paint from my work truck bumpers,though unintended! ----- Original Message ----- From: W8KT To: Repeater-Builder@yahoogroups.com Sent: Friday, July 30, 2004 9:55 PM Subject: Re: [Repeater-Builder] FAA Paint Removal OK, I should have been more specific. This is going on my tower. It is a 140 foot length of Andrew 1 1/4" hardline. I have been very careful in the components used to avoid any "problems". The tower is Pirod as is all of the hardware. Lightning rod, "T" bars for the snap in hangers, etc. All grounding is #2 stranded with 3 ground rods per leg all tied together. All cables grounded. Polyphasers on all lines. Single point ground for the entire station. Just trying to save a few bucks on the transmission lines. Thanks for all the tips, Bob [EMAIL PROTECTED] wrote: Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.