I'd be vary suspicious of the pins and contacts on the exciter. Bryan N3ST
-----Original Message----- From: georgiaskywarn [mailto:[EMAIL PROTECTED] Sent: Saturday, September 18, 2004 12:06 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Repeater audio not passing I have posted this before...thought I had it fixed ;-) GE Mastr Exec II with built in RC100 controller. Sometimes the repeater audio just comes and goes. This is ALL the audio, repeateed audio and all the tail beeps. However on it's own...it will come back. Thought it was that main plug set on the thing oxidizing...but after cutting the plug off and soldering directly to the pins...I don't think that is the problem any more. I have pushed and pulled on the connections to the RC100...so I don't think that is the problem. Again...the audio just comes and goes with no rhyme or reason :-( Ideas? Thanks, Robert Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
