Thanks for all the replies. Seeing all positive responses, I tried it and it worked perfectly.
Thanks again..... Adam N2ACF ----- Original Message ----- From: "Jim Ray, Sr." <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Friday, September 17, 2004 2:46 PM Subject: [Repeater-Builder] Re: VibraSponder Question > I don't think there is any difference. I really never plugged a small > one into an older chassis that took large ones, but I build a lot of > boards to convert older equipment to tone aquelch (Private Line) and > used either type for those boards. > > Jim, Glendale, AZ, USA > > --- In Repeater-Builder@yahoogroups.com, "Adam C. Feuer" > <[EMAIL PROTECTED]> wrote: > > Hello All, > > > > Is it ok to replace a TLN8381A (larger size) with a KLN6209A > (smaller size)? It plugs into the socket just fine but for obvious > reasons, there is a lot of room to spare. > > > > Will there be any performance issues? > > > > Thanks in advance.... > > > > Adam N2ACF > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/