Thanks Joe. I'll check that out.
-Tim -----Original Message----- From: mch [mailto:[EMAIL PROTECTED] Sent: Thursday, September 30, 2004 10:44 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] The duplexer story... Tim S. wrote: > > -----Original Message----- > From: Paul Kelley [mailto:[EMAIL PROTECTED] > > >What is the SWR looking into the duplexer? > > Did not check that. What should it be? I assume 10% or less reflected. 4% is 1.5:1 (100W out - 4W back OR 50W out - 2W back) It should be no more at the TX end of the duplexer than at the antenna end of the duplexer. If it is higher, look for a spurious TX. That might also explain your original desense as well as the additional power out. Joe M. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
