Re: [Repeater-Builder] Mitrek test set cable

[Ray Rosler]

Should have added that the orginal cable came with the right angle plug and a 11 pin plug on the other end, which then plugs into the cable required for the mitrek. coverts the 11 pin plug to the  round metering plug for the mitrek   Ray ----- Original Message ----- From: TGundo 2003 To: Repeater-Builder@yahoogroups.com Sent: Thursday, October 21, 2004 1:25 PM Subject: Re: [Repeater-Builder] Mitrek test set cable I have the micor one with the test set already, which is retangular. The mitrek does indeed need the round plug, which is the one I need.   Thanks!   Tom, W9SRV [EMAIL PROTECTED] wrote: In a message dated 10/21/2004 2:07:09 PM Central Standard Time, [EMAIL PROTECTED] writes:   I 'think' it should be the same as your Micor test cable.   Neil Nope!    The mitrek, motrac and motran are had round "test ports" not the 7 pin micor plug.   Thanks! Brian, wd9hsy Do you Yahoo!? Express yourself with Y! Messenger! Free. Download now. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.