Hi Mr. Motorola your up & awake this morning. Oregon Repeater Linking Group Mike Mullarkey [EMAIL PROTECTED] www.orlg.org
-----Original Message----- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 07, 2004 7:06 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] MICOR LOW AUDIO Ignore the jumper - just remove CR957 ... simple as that. Neil - WA6KLA David wrote: > > yes that diode is missing on my board there is a jumper right > next to where the diode goes but nothing tells me to do anything > with the jumper. > > ----- Original Message ----- > From: "Gerald Pelnar" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Monday, December 06, 2004 9:50 PM > Subject: Re: [Repeater-Builder] MICOR LOW AUDIO > > > > > ----- Original Message ----- > > From: "David" <[EMAIL PROTECTED]> > > > > > > > my repeater is a micor compu station I have used the following site to > > make > > > the connections between the repeater and the controller > > > http://www.ccdx.org/zedyx/mods/micorbas.htm > > > so audio coming from the micor is just low is there something I missed > in > > > making the micor into a repeater? > > > > Was this originally a base station? If so did you remove CR957 from the RX > > interconnect board. Check this link. > > > > http://www.repeater-builder.com/rbtip/micorrxintcon.html > > > > Gerald > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/