--- In Repeater-Builder@yahoogroups.com, "T.J." <[EMAIL PROTECTED]> wrote: "I'm looking to see if any one on the list that runs an MSF 5000 has experienced this problem. When I key up this VHF MSF and start counting, the repeater doesn't key up and start retransmitting untill I get to four. So there is about a good two second delay to repeater key up..." _________________________________________________________
One possible cause of that behavior would be if your station was ever set up for use with a Motorola Spectra-TAC voting system. In such systems the normal repeat audio path is through the voting comparator and back to the station through the wire-line. A station that is set up for Spectra-TAC and is also set up as a repeater has a mode called "in-cabinet repeat". Basically what happens is that when the receiver unsquelches, the controller expects to receive a line key command from the voting comparator. If that never comes - the station will eventually key up and repeat "in-cabinet". That would exactly account for what you are seeing. If your station does have Spectra-TAC enabled, it would be preferable for you to load a conventional non Spectra-TAC codeplug, however you could go to the "Edit Advanced Information" page three and try setting the "S-Tac Clear Repeater Delay" parameter to zero. You can tell if your station has Spectra-TAC enabled by going to the F8 Station Model / Options screen in F4 Change / View. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/